TLDR Stick with 80Mhz on channel 44 as some devices may support it and most routers will drop down to 40Mhz to cater for non compliant devices. On my access networks I operate 2.4Ghz on 20Mhz width and 5Ghz on a 40Mhz width as not enough 5Ghz stuff supports 80Mhz yet and you just increase the collision zone.
Ifyou skip the video then you miss the best tips.🙏Thank you so much for spending your time to watch my video and please don't forget to LIKE & SUBSCRIBE. S Theuse of 40 MHz is not desirable or practical in the 2.4 GHz band. However, a single 20 MHz channel could be used with lower throughput, largely defeating the gain of using 802.11n. In the 5 GHz band, twenty four non-overlapping 20 MHz or up to twelve 40 MHz channels exist. IEEE 802.11b/g Channel Assignments
Perbedaan20mhz Dengan 40 Mhz. Wireless atаu wireless network merupakan sekumpulan perаngkat elektronik yang saling terhubung аntara sаtu dengan lainnya sehinggа terbentuk sebuah jaringan komunikаsi data dengаn menggunakan media udаra/gelombang sebagаi jalur lintas dаtanya. Jika lаn masih menggunakan kаbel sebagai mediа lintas data
Foreither 20 MHz or 40 MHz operation, the Channel Width field is set to 0. 80 MHz operation sets this value to 1. Because it is necessary to distinguish the 160 MHz channel width (a value of 2) from the 80+80 MHz channel structure (a value of 3), they receive separate values. Therefore, 802.11ac extended the RTS and CTS to add bandwidth
Configurea 20 MHz channel for the AP group's 802.11g (2.4 GHz) radio profile. In this instance, channel 1 is the assigned 20 MHz channel and 40 MHz mode is disabled and click Apply. Using the CLI Country codes are generally specified in ISO 3166 format. To see what channels are available for a given country code, use the show ap allowed
h7TJ. 376 5 137 430 225 473 179 176 2

which is better bandwidth 20mhz or 40mhz